<------------Go back to Muddytires

Brake Fluid Tester, PeachFYE Auto Car Shop Tools Diagnostic Testing Tool Auto Brakes Calibrated Tester for DOT3 DOT4 DOT5 with 5 LED Indicator

February 13, 2018 - Comment

Operation Guideline: 1. Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device. 2. Press the button for power on, green LED will light up. Insert the tester into reservoir for one second then

Buy Now! $10.99Amazon.com Price
(as of 4:58 am UTC - Details)

Operation Guideline:

1. Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.
2. Press the button for power on, green LED will light up. Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.

Tester Specification:

1. To check the quality of brake fluid quality.
2. 5 LEDs to indicate percentage of water in the brake fluid.
3. Automatically power off.
4. Operated by a LR03 AAA 1.5V battery. ( Not included )

Indicator Instruction:

1. 5 LEDs indicating the water % in the brake fluid:
2. 0% light indicates that the battery is OK, no replacement
3. 1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.
4. 2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use.
5. 3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid.
6. 4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately.

Package Including:

1 * Car Brake Fluid LED Tester Detector (Note: No battery, you need to purchase a battery by yourself !)

Product Features

  • Designed without cable connector,Easy and quick way to test for moisture content in the brake fluid,Only takes seconds to know the results.
  • Green\Orange\Red – LED light indicators clarity show percentage of water in the brake fluid,It determines the quality of brake fluid and measures moisture from 0%-4%.
  • Press the button for power on, green LED will light up. Insert the tester into reservoir for one second, Repress the button for power off,automatically shuts off after 12 Seconds.
  • This brake fluid tester is calibrated for DOT 4 brake fluid only, which is used in most cars produced since 2006.
  • Note! Takes 1 x AAA/1.5V battery (not included)

Comments

Write a comment

*