<------------Go back to Muddytires

MOACC Elm327 WIFI Wirless OBD2 OBD-II Car Diagnostic Reader Scanner Scan Tool Protocols for Iphone iPad iOS PC Android Torque

November 14, 2013 - Comment

Product Description:wifi 327 can be used on ISO/pc/Android and so on…Wifi OBD VGATE Technical SpecificationsSSID: CLKDevicesIP: 192.168.0.10Subnet: 255.255.255.0Port: 35000Range: 50 ft (Line of sight)Antenna: InternalPower Consumption: 0.75 Watts (With Power Switch)Wifi Standard: 802.11a/b/gOperating Temperature: -15 to 100 Deg CelsiusPlastic: Automotive GradePhysical Dimensions: 2.75 x 1.25 x 1.2 inches Feature:CLK is capable of communicating with vehicles

Buy Now! $24.99Amazon.com Price
(as of February 26, 2017 5:05 pm UTC - Details)

Product Description:

wifi 327 can be used on ISO/pc/Android and so on…
Wifi OBD VGATE Technical Specifications
SSID: CLKDevices
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches

Feature:

CLK is capable of communicating with vehicles which adopt following protocols:
ISO 9141
ISO 11898(aka. CAN)
ISO 14230(aka. KWP2000)
ISO 15765(aka. CAN)
SAE J1939

WI-FI OBD AUTO CHECKER is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, ISO and so on). There are plenty of software packages available, which are fully compatible with WI-FI OBD AUTO CHECKER. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained.

Following are some of the parameters which could be read from the vehicle.
Vehicle Speed, RPM, Fuel Consumption*, Engine Coolant Temp
Fuel Pressure, Calculated Engine Load, Throttle Position, Intake Manifold Pressure
Air Intake Temp, Timing Advance, Mass Air Flow, Fuel Level
Barometric Pressure, EVAP System Vapor Pressure, Fuel Trim

Product Features

  • This WIFI interface support all OBDII Protocls
  • This wifi interface can be used on ISO/PC/Android
  • This WIFI OBD interface are fully compatible with many software, such as such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.
  • Power Consumption: 0.75 Watts, Operating Temperature: -15 to 100 Celsius, Size: 15x13x4cm
  • Package including: 1pc x ELM327 WIFI OBD2 Scanner and 1pc x CD Drive

Comments

Write a comment

*